Closed Loop Extraction Systems (CLS) 109: Extractor Disassembly

When the extractor has been properly shut down, it’s time to disassemble it and reveal the cannabinoid alchemy you’ve performed, turning solid green plant matter into a concentrated liquid gold $)

Step 7 – Extractor Disassembly – remove stainless steel hose (D) from extractor column valve (1)
Component #	Component Name	Abbreviation	Open/On	Closed/Off
1	Extraction Column Valve	ECV		x
2	Low Pressure Recovery Manifold	RM2		x
3	High Pressure Recovery Manifold	RM3		x
4	Purge Port	PP		x
5	Recovery Cylinder	RC		x
6	Vacuum Pump	VP		x
7	Recovery Pump	RP		x

Step 7.1 – Extractor Disassembly – open extractor column valve (1) to allow air to enter extractor
Component #	Component Name	Abbreviation	Open/On	Closed/Off
1	Extraction Column Valve	ECV	x
2	Low Pressure Recovery Manifold	RM2		x
3	High Pressure Recovery Manifold	RM3		x
4	Purge Port	PP		x
5	Recovery Cylinder	RC		x
6	Vacuum Pump	VP		x
7	Recovery Pump	RP		x

Step 7.2 – Extractor Disassembly – remove extraction column (11)
Component #	Component Name	Abbreviation	Open/On	Closed/Off
1	Extraction Column Valve	ECV	x
2	Low Pressure Recovery Manifold	RM2		x
3	High Pressure Recovery Manifold	RM3		x
4	Purge Port	PP		x
5	Recovery Cylinder	RC		x
6	Vacuum Pump	VP		x
7	Recovery Pump	RP		x

Step 7.3 – Extractor Disassembly – remove extractor base from extractor collection vessel (12)
Component #	Component Name	Abbreviation	Open/On	Closed/Off
1	Extraction Column Valve	ECV	x
2	Low Pressure Recovery Manifold	RM2		x
3	High Pressure Recovery Manifold	RM3		x
4	Purge Port	PP		x
5	Recovery Cylinder	RC		x
6	Vacuum Pump	VP		x
7	Recovery Pump	RP		x

As always, if you have any questions please post them in the comments section. Your questions and time are valuable and we will make every attempt to help you through your process.